Storing And Returning To Service; Storing Your Vehicle; Returning To Service - Taylor-Dunn B0-254-48 Operation, T Roubleshooting And Replacement Parts Manual

SAFETY RULES AND OPERATING INSTRUCTIONS

STORING AND RETURNING TO SERVICE

Both storing your vehicle and returning it to service should only be performed by authorized personnel.

Storing Your Vehicle

•
Clean the batteries, then fill and charge before putting the vehicle in storage. Do not store
batteries in a discharged condition.
•
Lube all grease fittings.
•
Clean, dry, and check all exposed electrical connections.
•
Inflate tires to proper pressure (if applicable).
•
For extended storage, the vehicle should be elevated so that the tires do not touch the ground.
If stored for a prolonged period, the batteries should be charged as follows:

Returning to Service

•
Check the battery's state of charge and charge if required.
•
Perform ALL maintenance checks in the periodic checklist.
•
Remove any blocks from the vehicle and/or place the vehicle down on to the ground.
•
Test drive before putting into normal service.
Storage
Charging Interval
Temperature
(months)
(F)
Over 60
Between 40 and 60
Below 40
R
Safety Rules Page 15
1
2
6