Storing / Returning To Service; Storing Your Vehicle; Returning To Service - Taylor-Dunn SS-025-34 Operation, Maintenance, And Replacement Parts Manual

SAFETY RULES AND OPERATING INSTRUCTIONS
STORING / RETURNING TO
SERVICE
Both storing your vehicle and returning it to service
should only be performed by authorized personnel.

Storing Your Vehicle

•
Clean the batteries, then fill and charge before
putting the vehicle in storage. Do not store
batteries in a discharged condition.
•
Lube all grease fittings.
•
Clean, dry, and check all exposed electrical
connections.
•
Inflate tires to proper pressure (if applicable).
•
For extended storage, the vehicle should be
elevated so that the tires do not touch the ground.
If stored for a prolonged period, the batteries should be
charged as follows:
Storage
Charging Interval
Temperature
(F)
Over 60
Between 40 and 60
Below 40

Returning to Service

•
Check the battery's state of charge and charge if
required.
•
Perform ALL maintenance checks in the periodic
checklist.
•
Remove any blocks from the vehicle and/or place
the vehicle down on to the ground.
•
Test drive before putting into normal service.
(months)
1
2
6
R
Safety Rules
Page 11