Repair The Tire (Pneumatic) - Taylor-Dunn B0-254-48 Operation, T Roubleshooting And Replacement Parts Manual

Maintenance, Service, and Repair
4
1
2
3
4-Bolt Pattern

REPAIR THE TIRE (PNEUMATIC)

NOTE: To properly repair a puncture, the tire must be removed from the
It is recommended to repair a tire with a combination vulcanized plug and internal patch.
Tire repairs should only be performed by personnel trained in tire repair.
The tire repair procedure will be unique to the type of repair equipment or repair components used.
Refer to the instructions provided with your equipment or repair components.
3
5-Bolt Pattern
Pattern for tightening the wheel nuts
Re-torque all wheel nuts to their final value after 1-week (20-hours)
of operation. Failure to re-torque the wheel nuts may result in the
wheel coming off of the vehicle causing severe bodily injury and/or
property damage.
Do not attempt to repair a tire with a damaged side wall or a slice in
the tread. This type of repair could fail prematurely resulting in severe
bodily injury and/or property damage.
wheel. Refer to Replace the Tire section for information on
removing the tire from the wheel.
Tires and Wheels
1
4
2
5
Page 4
1
6
8
3
4
5
7
2
8-Bolt Pattern