External Alternator (Optional Extra); Technical Data; Connection - Rotax 912 Series Installation Manual

2.5)

External alternator (optional extra)

See
General note

2.5.1) Technical data

NOTE:
General note
Output: Max. 600 W/DC at 6000 r.p.m.
Output
Output Voltage: 14.2 V - 14.8 V.
Output Voltage
Ambient temperature:
Ambient temper-
ature range
See chap. 72-00-00 section: Technical data.
Weight

2.5.2) Connection

Power supply wires to external alternator (1) located on the outside of pro-
Power supply
wires
peller gear.
Positive terminal (2):
Positive terminal
- M6 screw connection suitable for cable terminal acording to DIN 46225
(tightening torque 4 Nm (35 in.lb).
Via engine block.
Grounding
Control wiring (field circuit) (3):
Control wiring
- Via supplied standard plug (Sumitomo 6111-2568) and 6.3 x 0.8 Fasten
connectors.
Effectivity: 912 Series
Edition 2/Rev. 0
BRP-Powertrain
INSTALLATION MANUAL
Fig. 7.
The voltage regulator is integrated in the alternator.
Min. -30 °C (-22 °F)
Max. +90 °C (194 °F)
24-00-00
page 13
August 01/2012