System-System Management - Eneo BLR-3004 Operation Instructions Manual

SYSTEM SETUP

SYSTEM-SYSTEM MANAGEMENT

F/W version: Shows the current firmware version of the DVR.
H/W version: Shows the hardware version of the DVR.
VIDEO SIGNAL TYPE: The DVR automatically switches between PAL and NTSC depending on the
DISK CAPACITY: The first value shows the amount of hard drive capacity used by recorded footage.
The second value shows the total hard drive capacity installed.
IP ADDRESS: Shows either the manual IP address entered in the „NETWORK‟ menu, or the automatic
IP address assigned by a DHCP server, if enabled.
MAC ADDRESS: Shows the MAC (Media Access Control) address of the DVR. It is a unique identifier –
no other network device has the same MAC address.
DDNS DOMAIN NAME: If DDNS is enabled, the host DDNS server is specified here.
NET CLIENT PORT : The port number that the DVR uses to support remote connection from the client software.
WEB SERVER PORT : The port number that the DVR uses to support remote connection from Internet Explorer
SYSTEM NAME : This field is used so that notification e-mails can be identified by system name.
video format of the Channel 1 input signal at the time of power on.
or other web browsers.
Click on the „SYSTEM MANAGEMENT‟ menu.
30