Camera : Ptz Setup - Eneo BLR-3004 Operation Instructions Manual

SYSTEM SETUP
The selected channel is displayed in full screen mode.
BRIGHTNESS, CONTRAST, TINT and COLOR can be changed as necessary.
To modify a different channel, highlight the CAMERA field, and choose the desired channel.
Press RETURN when all changes are completed.

CAMERA : PTZ SETUP

ADDRESS: The unique ID of the PTZ device.
PROTOCOL: The protocol of the PTZ device.
BAUD RATE: The baud rate of the PTZ device.
DETAIL : Detail setting for PTZ device. (Refer to the next page.)
TOUR : Tour setting for PTZ device. (Refer to the next page.)
Modify each value using the
Click the PTZ SETUP menu.
Click on any field to modify its value.
Change the value by the
20
button.
button.