System Configuration - Remote Controller - Eneo BLR-3004 Operation Instructions Manual

SYSTEM CONFIGURATION – Remote Controller
3. Handheld IR Remote Controller
POWER
ON/OFF
ID Button
Select DVR Unit ID
RETURN
Cancel / Deselect
Previous Screen
※ If there are multiple DVRs stacked or mounted in a rack, each DVR must be assigned a unique ID number,
so that each DVR can be controlled with a single remote controller, referencing each DVR by its own ID.
How to choose which ID to use on the remote controller:
Press the ID button. The system will display „INPUT ID'.
-
Enter the digits of the unit ID, and then press the ENTER button. (The default unit ID is „01‟).
-
- To return back to normal control of the DVR, now press the RETURN button.
Factory Default Setting: Input unit ID „255‟ and then press ENTER and RETURN.
-
SETUP : Go to Main Setup Menu
Channel Selection Buttons
(also used for Password Digit Entry)
ENTER : Confirm / Select / Next Screen
Navigation Buttons
Used for Playback Control,
Menu Navigation, and PTZ Control
DISP : Change Screen Division mode.
SEARCH : Go to Search menu.
PTZ : Go to PTZ menu.
PANIC : Toggle Panic Recording mode.
KEYLOCK : Toggle Key Lock (Panel & Remote)
SEQUENCE : Toggle Sequence mode.
ZOOM : Go to Digital Zoom mode.
ARCHIVE : Go to Archiving menu.
12