Eneo BLR-3004 Operation Instructions Manual page 21

SYSTEM SETUP
Click the „TOUR‟ button and set the MODE to „AUTO‟ in order to use the TOUR function.
First, you must choose the channel of the PTZ device which you are configuring the tour for.
Select a valid PRESET number for each step of the tour.
Select the DWELL TIME, which is the amount of time that the PTZ will wait before moving to the next preset.
Advanced PTZ properties can be adjusted for each channel using the „DETAIL‟ button.
Some settings, such as Auto Focus, may not be compatible with all PTZ devices.
If this is the case, changing this value will have no effect on PTZ control.
21