Installing Hdd; Starting System - Eneo IER-25R040004A User Manual

2.1

Installing HDD

How to install HDD in the device:
Attention
1 Always switch off and unplug the unit.
2 Unscrew with a screw driver (+) and open the unit cover.
3 Install HDD in the bottom case.
4 Connect a data cable and power cable with HDD.
5 Close the cover and tighten screws.
2.2

Starting System

Power supply begins with system operation as follows:
1 Switching on initialize with below icons in order.
Note
2 With buzzer sounds, the start screen is presented.
3 In Log in screen, enter the ID, Password and press OK.
Note
Default ID & Password is admin/admin
Please change password after login due to security.
Attention
Click to see the MAC address.
If lost password, inform the MAC address to supplier to create temporary
Note
password.
IER-25Nxxx
All manuals and user guides at all-guides.com

Withdraw the mains plug before installing HDD to reduce the risk of injury or
electrical shock, or device malfunction.

Make sure to check the compatibility of HDD with the device.
Installing new HDD might take more initialize time.
Seite 7