Eneo BLR-3004 Operation Instructions Manual page 42

RECORD SETUP
CONTINUOUS / MOTION RECORDING SETUP
This menu allows the operator to configure continuous and motion-activated recording, based on a schedule.
There are 2 sections to this menu:
SIZE / IPS / QUALITY:: Recording settings for each channel can be defined across a 24-hour period, in blocks
SCHEDULE: This section determines at what times the DVR will record and whether it is set to continuous or motion.
SIZE / IPS / QUALITY
To change „SIZE / IPS / QUALITY‟ settings, highlight „CONTINUOUS / MOTION SETUP‟ and press „ENTER‟.
Ensure that „SIZE / IPS / QUALITY‟ is highlighted in yellow, and press „ENTER‟ again.
The 24 hour time bar is highlighted in green.
(for example between 09:00 and 18:00) or by each individual hour. Note that when
SCHEDULE MODE is set to WEEKLY, each day of the week can be individually configured.
Click on the
„CONTINUOUS / MOTION RECORDING‟ menu.
Click on the „SIZE / IPS / QUALITY‟ tab.
42