Table of Contents
Advertisement
C
O
N
N
E
C
T
&
C
O
N
N
E
C
T
&
• Connect up to 16 CAMERA INPUTS as necessary.
• Connect one or more monitors to the DVR using the COMPOSITE or DVI (VGA).
• Connect power to the DVR, using the provided DC 12V Power Adapter.
The DVR will check for proper power connection and emits two beeps if system power test is OK.
• Press the POWER BUTTON on the front panel of the DVR to begin operation.
P
O
W
E
R
O
N
P
O
W
E
R
O
N
- The DVR startup screen detects and checks the status
of all internal hard drives, and the CD/DVD-RW drive.
- After startup diagnostics are complete, the operator must
login to the system. The default user name is „ADMIN‟.
- Using the CHANNEL SELECTION buttons, key in the digits of
the default password („1234‟) and then press the ENTER button.
- After DVR startup, the system will show the default display of
all 16 channels in a standard 4x4 Screen Division mode.
- The status bar at the bottom of the screen shows the current
Date/Time and the percentage of Hard Drive capacity used.
- The title for each channel is shown.
- A red recording icon and the letter „C‟ in the top right of each
channel shows that the channel is recording in „Timer‟
(Scheduled / Continuous) recording mode.
13
Hide quick links:
Advertisement
Table of Contents
