Event / Sensor - Hdd Event; Event / Sensor - Alarm Input - Eneo BLR-3004 Operation Instructions Manual

SYSTEM SETUP
EVENT / SENSOR
From the „System Setup‟ menu, click on the „EVENT / SENSOR‟ menu.

EVENT / SENSOR - HDD EVENT

The DVR will continually monitor the health of the hard drives in the system and detect problems that may be developing.
SMART ALARM: Enables S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) hard disk monitoring.
CHECK INTERVAL: Frequency of testing.
DISK FULL EVENT: Determines whether a „Disk Full‟ condition would result in a HDD event.

EVENT / SENSOR - ALARM INPUT

The menu will determine the behavior of each of the 16 alarm inputs.
OPERATION: Alarm inputs can be enabled or disabled.
TYPE: Alarm inputs can be set as normally open (N/O) or normally closed (N/C).
Click on the „HDD EVENT‟ menu, and choose any field.
. Use the button to modify the value.
Click on the „ALARM INPUT‟ menu, and choose any field.
Use the button to modify the value.
36