Product Description - Eneo BLR-3004 Operation Instructions Manual

Product Description

1. Front Panel
① CD/DVD-RW : CD/DVD-RW Device for Archiving.
② Channel Selection Button : Select Channel (1 ~ 16) or Input Password Digits.
③ LED Indicator: Indicate Present System Status Information.
( PWR: System Power On/Off, REC: Record On/Off, ALARM: Alarm Sensor Status,
NET: Network Client Connection Status, )
④ Search Controller : Searching Recorded Data or Control Menu & PTZ / FOCUS.
⑤ HOLD : Hold current position of Jog / Shuttle wheel.
⑥ JOG : Navigate through video frame-by-frame, while in Pause.
⑦ Eject : Eject CD / DVD.
⑧ DISPLAY : Switch Screen Division Mode (and Screen Rotation Mode).
⑨ SEARCH : Go to Search Menu.
⑩ MENU : Go to System Menu.
⑪ PTZ / FOCUS : Go to Camera PTZ Control.
⑫ RETURN : Cancel / Deselect / Return to Previous Screen.
⑬ ENTER : Confirm / Select / Go to Next Screen.
⑭ Remote Controller IR Sensor
⑮ USB Port: USB port for USB Mouse, USB Memory Stick, or USB HDD archiving devices.
Tip
• Power Button uses "Soft-Off" with Password to prevent accidental shutdown.
• Channel Selection Buttons can be used in most Screen Division modes.
• If the IR Sensor is blocked, the Remote Controller will NOT work properly.
• When any Front Panel Button is pressed, it is accompanied by a system beep.
• Depending on the model of CD/DVD-RW installed, the actual appearance of the
DVR system may look different from what is pictured above.
10