Eneo BLR-3004 Operation Instructions Manual page 26

SYSTEM SETUP
Click „ADD‟. The "Sequence Setup" submenu appears.
- Determine the Screen Division mode under the "VIEW TYPE" section.
- Assign the desired channel under the "CONFIGURE" section.
- When all sequence settings have been entered correctly, click „CONFIRM‟.
- To add an additional mode, click „ADD‟ continuously. After finishing the setup, click „CLOSE‟.
- To modify the current pattern, double click it. The „Sequence Setup" window will appear again.
- The new sequence has now been saved, and can be started by pressing the „SEQ‟ button while in Live View mode.
26