Trouble Shooting & Maintenance - Exerpeutic Elliptical 1302 Owner's Manual

TROUBLE SHOOTING & MAINTENCE
TROUBLE SHOOTING
Computer not working correctly
Check to make sure the computer cable is connected securely.
Make sure the batteries are installed correctly.
Make sure the batteries are not dead.
No resistance
Turn the tension knob to lowest tension, pull the friction belt through the buckle to
tighten.
The elliptical trainer wobbles when in use
Turn the rear stabilizer end cap on the rear stabilizer as needed to level the elliptical
trainer.
Squeaking noise when in use
The bolts may be loose on the elliptical trainer, please inspect the bolts and tighten
the loose ones.
No, inconsistent, or erratic heart rate reading
Always hold on to the handlebar grip sensors with two hands instead of just one.
Try to maintain moderate pressure while holding onto the hand pulse sensors.
Make sure that the wire connections for the hand pulse sensors are secure.
MAINTENANCE
Cleaning
The elliptical trainer can be cleaned with a soft cloth and mild detergent. Do not use
abrasives or solvents on plastic parts. Please wipe your perspiration off the elliptical
trainer after each use. Be careful not get excessive moisture on the computer
display panel as this might cause an electrical hazard or electronics to fail. Please
keep the elliptical trainer, specially, the computer console, out of direct sunlight to
prevent screen damage. Please inspect all assembly bolts and pedals on the
machine for proper tightness every week.
Storage
Store the elliptical trainer in a clean and dry environment away from children.
19