Exerpeutic Elliptical 1302 Owner's Manual page 17

ASSEMBLY
12
Remove Bolts (88) from the back of the
Computer (53). Remove Bolts (38) and
Curve Washers (93) from the Front Post (5).
Insert the Hand Pulse Sensor Wires (55)
from the Handlebar (6) into the hole on the
Front Post (5) and then pull them out from
the top end of the Front Post (5).
Connect the Hand Pulse Sensor Wires (55)
Sensor Wire I
and (64) to the wires that
come from the Computer (53).
Assemble Handlebar and Computer with
the hardware previously removed.
16