Exerpeutic Elliptical 1302 Owner's Manual page 13

5
6
ASSEMBLY
Connect Tension Control Knob cable (51)
to the Tension Cable (27).
Install the Knob using Bolt (62) and
Washer (61) removed from the Knob.
Remove Bolts (40), Spring Washers (41),
Big Washers (46), and Washers (42)
from the left and right horizontal axes of
the Front Post (5).
Then attach the Left Handrail Arm (3L)
onto the left horizontal axis of the Front
Post (5) with one Bolt (40), Spring
Washer (41), Big Washer (46), and
Washer (42) that were removed.
(Repeat step for right side).
12