1. Manuals
  2. Brands
  3. Exerpeutic Manuals
  4. Elliptical Trainer
  5. 1318
  6. Owner's manual

Exerpeutic 1318 Owner's Manual

Hide thumbs Also See for 1318:
Table of Contents

Advertisement

Quick Links

ELLIPTICAL
IMPORTANT: Read all instructions carefully before using this product. Retain this
owner's manual for future reference. The specifications of this product may vary from
this photo and, subject to change without notice.
OWNER'S MANUAL
1318.6-051917

Advertisement

Table of Contents
loading

Related Manuals for Exerpeutic 1318

Summary of Contents for Exerpeutic 1318

  • Page 1 ELLIPTICAL IMPORTANT: Read all instructions carefully before using this product. Retain this owner’s manual for future reference. The specifications of this product may vary from this photo and, subject to change without notice. OWNER’S MANUAL 1318.6-051917...
  • Page 2 PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE. STOP. Contact customer service if you have any questions regarding assembly or proper operation of the machine. Email us at: Service@paradigmhw.com Or call us at: 1-844-641-7921 Hours: 8:00 am to 5:00 pm (PST) Daily...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS SERVICE ------------------------------------------------------------------------------------ LABEL PLACEMENT --------------------------------------------------------------------- IMPORTANT SAFETY GUIDELINES ------------------------------------------------ OVERVIEW DRAWING ------------------------------------------------------------------ PARTS LIST -------------------------------------------------------------------------------- HARDWARE & TOOLS PACK -------------------------------------------------------- ASSEMBLY --------------------------------------------------------------------------------- CONSOLE---------------------------------------------------------------------------------- ADJUSTMENTS--------------------------------------------------------------------------- TROUBLESHOOTING & MAINTENANCE ----------------------------------------- WARRANTY ------------------------------------------------------------------------------- PARTS REQUEST FORM -------------------------------------------------------------...

  • Page 4: Service

    SERVICE IMPORTANT: FOR NORTH AMERICA ONLY For damaged or defective product, questions, replacement parts or any other service support, please contact our customer service department by the below methods: For The Best Service, please Email: service@paradigmhw.com Response Time: 1-2 Business Days Emailing us with the information above will be the best method to receive a response during peak business hours Website:...

  • Page 5: Label Placement

    LABEL PLACEMENT...

  • Page 6: Important Safety Guidelines

    IMPORTANT SAFETY GUIDELINES Read all guidelines before using this machine. When using this machine, basic precautions should always be followed, including the following: WARNING - To reduce the risk of injury to persons: Make sure your equipment is correctly assembled before you use it. Be sure all screws, nuts, and bolts are tightened prior to use.
  • Page 7 IMPORTANT SAFETY GUIDELINES Do not use this equipment if you have any of the following conditions or ailments: • Pregnancy • Extreme obesity • Middle ear infection • Hiatus hernia or Ventral hernia • Glaucoma, retinal detachment or conjunctivitis • Use of anticoagulants including Aspirin in high doses.

  • Page 8: Overview Drawing

    OVERVIEW DRAWING...

  • Page 9: Parts List

    PARTS LIST Description Description Main Frame Handrail Foam Grip Ø32x5tx750mm Handlebar Foam Grip Front Stabilizer Ø60x1.5tx510mm Ø32x3tx380mm Rear Stabilizer Ø60x1.5tx590mm Flywheel Ø200 Front Post Ø60x2.0tx975mm Magnetic bracket Handlebar Ø32*1.6t Handlebar End Cap Ø32 6L Upper Left Handrail Ø32 Handrail End Cap Ø50 Hexagon Socket Head Bolt 6R Upper Right Handrail Ø32 M8x15mm...
  • Page 10 PARTS LIST Description Description 58A Handrail Arm Cover-A 88A Upper Crank Cover A (Pantone) 58B Handrail Arm Cover-B 88B Upper Crank Cover B (Pantone) Round Head Self Tapping Screw Wire Plug M4.5x15mm 60 Decorate Cover Ø60 Magnet 61 Decorate Cover 口 30x60 Spring 0.8x13 62 Bearing R12 Sensor Magnet Ø15x7mm...

  • Page 11: Hardware & Tools Pack

    HARDWARE & TOOLS PACK...

  • Page 12: Assembly

    ASSEMBLY Tool: Multi Hex Tool with Phillips Screwdriver STEP 1 1a. Installing the Front Stabilizer –Lift up the front of the Main Frame (1), and then align the holes of the Front Stabilizer (2) with the holes on the front curve of the Main Frame (1).
  • Page 13 ASSEMBLY Tool: Multi Hex Tool with Phillips Screwdriver STEP 2 2a. Installing the Rear Stabilizer –Lift up the front of the Main Frame (1), and then align the holes of the Rear Stabilizer (3) with the holes on the front curve of the Main Frame (1).
  • Page 14 ASSEMBLY Figure A Tool: 5 mm Allen Wrench MUST TIGHTEN IN SEQUENCE: A,B,C,D,E,F,G,H. STEP 3 3a. Removing The Hardware From The Front Post –Use the 5mm Allen Wrench to remove the eight Hexagon Socket Head Bolts (109), eight Spring Washers (80), and eight Curve Washers (38) from the Front Post (4).
  • Page 15 ASSEMBLY Figure B Tool: Multi Hex Tool with Phillips Screwdriver STEP 4 4a. Removing The Hardware From The Console–Use the Multi Hex Tool with Phillips Screwdriver to remove the four Bolts (103) from backside of the Console (102). 4b. Connecting The Console Wires – Connect the Console Wire (12) to the black 10 pin wire coming out from the back of the Console (102) as shown in Figure B.
  • Page 16 ASSEMBLY Tool: 5 mm Allen Wrench STEP 5 5a. Removing The Hardware From The Front Post – Use the 5mm Allen Wrench to remove two Hexagon Socket Head Bolts (32), two Spring Washers (80), and two Curve Washers (38) from the Front Post (4). 5b.
  • Page 17 ASSEMBLY Tool: 5 mm Allen Wrench Multi Hex Tool with Phillips Screwdriver STEP 6 Note: The parts are marked with an “R” for right side and “L” for left side. 6a. Installing the Upper Handrails and Handrail Arms – Insert the Left Handrail Arm (7L) into Upper Left Handrail (6L).
  • Page 18 ASSEMBLY Tool: 5 mm Allen Wrench STEP 7 Note: The parts are marked with an “R” for right side and “L” for left side. 7a. Installing the Upper Handrails and Front Post – Install the Plastic Bushings (50) onto both sides of the posts on the Front Post (4). Then insert a Washer (51) on each side. Insert the Upper Left/Right Handrails (6L, 6R) onto their corresponding sides on the Front Post (4).
  • Page 19 ASSEMBLY Tool: Multi Hex Tool with Phillips Screwdriver STEP 8 Note: The parts are marked with an “R” for right side and “L” for left side. 8a. Installing The Left Pedal – Install the Left Pedal (22L) onto the Left Foot Bar (9L) and align to the holes.
  • Page 20 ASSEMBLY Tool: Multi Hex Tool with Phillips Screwdriver STEP 9 9a. Remove the plastic tape covering the left Crank (10) and Rotate the Crank (10) to its highest position. 9b. Installing the left side Upper Crank Cover A & B – Slide one Pedal Cover A (23A) all the way down the shaft of the left side of Crank (10).

  • Page 21: U Shape Bracket (

    ASSEMBLY Tool: 5 mm Allen Wrench STEP 10 Note: The parts are marked with an “R” for right side and “L” for left side. 10a. Installing the left side Foot Bar –Slide the U Shape Bracket (8) all the way down the shaft of the left side of Crank (10).
  • Page 22 ASSEMBLY Tool: 5 mm Allen Wrench Multi Hex Tool with Phillips Screwdriver STEP 11 Note: The parts are marked with an “R” for right side and “L” for left side. 11A. Installing the Handrail Arms –Insert the Left Handrail Arm (7L) into the U shaped Bracket (8) at the front of the Left Foot Bar (9L).

  • Page 23: Crank (

    ASSEMBLY Tool: Multi Hex Tool with Phillips Screwdriver STEP 12 12a. Installing the U Shape Bracket Covers –Turn the U Shaped Bracket Covers A/B (97A,97B) so that the cut outs on the side are facing the Crank (10). Insert the posts of the U Shape Bracket Covers A/B (97A,97B) into the holes at the rear of the Left/Right Foot Bars (9L,9R) and enclose the U Shape Brackets (8).
  • Page 24 ASSEMBLY Tool: Multi Hex Tool with Phillips Screwdriver STEP 13 13a. Installing the Foot Bar Covers A & B – Insert the posts of the Foot Bar Covers A / B (75A, 75B) into the holes at the front of the Left/Right Foot Bars (9L, 9R). Enclose the bracket of the Left/Right Foot Bars (9L, 9R) with the Foot Bar Covers A/B (75A, 75B).
  • Page 25 ASSEMBLY Tool: Multi Hex Tool with Phillips Screwdriver STEP 14 14a. Installing the Front and Rear Decorate Cover for Front Post and left side Handrail Arm Covers A&B – Attach Handrail Arm Covers A/B (58A, 58B) on to Upper Left Handrail (6L).
  • Page 26 ASSEMBLY Tool: Multi Hex Tool with Phillips Screwdriver STEP 15 15a. Installing the Bottle Holder – Remove the two Pan Head Screws (33) on the Front Post (4). Attach the Bottle Holder (101) onto the Front Post (4). Tighten the Bolts (33) by using the Multi Hex Tool with Phillips Screwdriver until firm and secure.

  • Page 27: Console

    CONSOLE I. Display: 1. The field is an individual LCD displaying: TIME, RPM\SPEED, DISTANCE, WATT\CALORIES, PULSE, USER. 2. Dot matrix display: ● The LCD screen will have a single dot matrix display with 8 rows and 16 columns. ● This dot matrix will be used to display the in work profile for the active program. II.
  • Page 28 CONSOLE Button Functions: III. START/STOP: Press the START/STOP button to start or stop exercise. UP: Press the UP button to navigate through the training program modes (Manual, Pre-set Programs, or User Program). To set target goals, and to increase resistance during exercise. DOWN: Press the DOWN button to navigate through the training program modes (Manual, Pre-set Programs, or User Program).
  • Page 29 CONSOLE IV. PROGRAM INSTRUCTIONS: MANUAL: 1. Select the MANUAL Program feature 2. Use the UP and DOWN buttons to set a resistance level. Press the ENTER button to confirm your selection. 3. Use the UP and Down buttons to set a TIME goal. Press the ENTER button to confirm your selection.

  • Page 30: Hand Pulse Sensor 2

    CONSOLE Heart Rate Recovery Test: 1. Select the FITNESS feature 2. Press the START/STOP button to begin the test. 3. Hold the Hand Pulse Sensors for the entire test. The test will last 8 minutes. After the test has been completed, The results are as follows: Figure State VERY GOOD...
  • Page 31 CONSOLE Heart Rate Control: 1. Select the H.R.C feature 2. Select a Heart Rate Zone, Either 55%, 75%, 90% or TAG. 3. Use the UP and DOWN buttons to set a TIME goal. Press the ENTER button to confirm your selection.
  • Page 32 CONSOLE VI. Functions View: Below is a list of Functions and their Values how they display on the console. Item Display Display Rang Stored GENDER MALE/ FEMALE 10-100 WEIGHT 20-330 (Lb) 10-150 (KG) HEIGHT 36-84 (INCH) 90-210 (CM) 0:00-99:59 TIME DISTANCE 0.0-99.99 0-999...
  • Page 33 CONSOLE VII. Pre-defined program profile: ● MANUAL ● PROGRAM ● FITNESS ● PERSONAL ● H.R.C. ● WATT ● RANDOM Program Profile for the P1~P12 Program ● P2 ● P3 ● P1...
  • Page 34 CONSOLE ● P5 ● P4 ● P6 ● P8 ● P7 ● P9 ● P11 ● P10 ● P12 Program Profile for the H.R.C. (55%, 75%, 90%, Tag) Program ●HRC (75%) ●HRC (55%) ●HRC (90%) ●HRC (Tag)

  • Page 35: Adjustments

    ADJUSTMENTS Adjusting the Rear Stabilizer End Cap Turn the Rear Stabilizer End Caps on the Rear Stabilizer (3) as needed to level the elliptical. Transporting the Elliptical Hold the Handlebar (5) and pull the machine until the wheels on the Front Stabilizer (2) make contact with the floor.

  • Page 36: Troubleshooting & Maintenance

    TROUBLE SHOOTING PROBLEM: The elliptical wobbles when in use. SOLUTION: Turn the rear stabilizer end cap on the rear stabilizer as needed to level the elliptical. PROBLEM: There is no display on the console. SOLUTION: Remove the console and verify the wires that come from the console are properly connected to the wires that come from the front post.
  • Page 37 Correct Incorrect *Before connecting any cables, please make sure the metal prongs of the cable are not damaged. MAINTENANCE Cleaning The unit can be cleaned with a soft cloth and mild detergent. Do not use abrasives or solvents on plastic parts. Wipe your sweat off the unit after each use. Be careful not to get excessive moisture on the console display panel, as this might cause an electrical hazard or cause the electronics to fail.

  • Page 38: Warranty

    WARRANTY MANUFACTURER’S LIMITED WARRANTY Paradigm Health & Wellness warrants to the original purchaser that this product is free from defects in material and workmanship when used for the purpose intended, under the conditions that it has been installed and operated in accordance with Paradigm’s Owner’s Manual.

  • Page 39: Parts Request Form

    PARTS REQUEST FORM Paradigm Health & Wellness, Inc. EMAIL THIS FORM WITH YOUR RECEIPT OF PURCHASE TO Service@paradigmhw.com NAME:_____________________________________________________________________________________ ADDRESS:__________________________________________________________________________________ CITY:________________________ STATE:_____________ ZIP:_______________________________________ TELEPHONE: (Day)______________________________________________________________________ (Night)_____________________________________________________________________ SERIAL#:___________________________________________________________________________________ MODEL#:___________________________________________________________________________________ PURCHASE DATE:___________________________________________________________________________ PLACE OF PURCHASE:_______________________________________________________________________ PART # DESCRIPTION “YOUR ORDER WILL BE PROCESSED WITHIN 3 BUSINESS DAYS” This form can also be faxed to #: 626-810-2166...

Table of Contents