Troubleshooting & Maintenance - Exerpeutic Pro Stride 23 Owner's Manual

TROUBLESHOOTING & MAINTENANCE
TROUBLESHOOTING
Computer not working correctly
Check to make sure the computer cable is connected securely.
Check that the AC Adaptor is securely connected to the Power Supply Cable and
to the electrical wall outlet.
The elliptical trainer wobbles or shakes when in use
Turn the adjustable leveler on the front stabilizer or U shape rail as needed to
level the elliptical trainer.
Squeaking noise when in use
The bolts may be loose on the elliptical trainer. Inspect all bolts and tighten as
needed.
No readings or inconsistent/erratic heart rate readings
Always hold on to the handlebar grip sensors with both hands instead of just one.
Try to maintain moderate pressure while holding onto the hand pulse sensors.
Make sure that the wire connections for the hand pulse sensors are secured.
MAINTENANCE
Cleaning
The elliptical trainer can be cleaned with a soft cloth and mild detergent. Do not use
abrasives or solvents on plastic parts. Please wipe your perspiration off the elliptical
trainer after each use. Be careful not to get excessive moisture on the computer
display panel as this might cause an electrical hazard or electronics to fail. Please
keep the elliptical trainer, especially the computer console, out of direct sunlight to
prevent screen damage or premature wear. Please inspect all assembly bolts and
pedals on the machine for proper tightness every week.
Storage
Store the elliptical trainer in a clean and dry environment away from children.
30