Installing The Processor - Mitsubishi Electric Apricot LS700 Owner's Handbook Manual

Install the Processor
To install the processor follow these steps:
1. Insert the processor in the retention mechanism (B) as
shown in figure 38.
2. Press down on the processor until it is firmly seated in
the Slot 1 connector and the latches (A) on the
processor lock into place.
Figure 38. Installing the Processor
A
3. Slide the top heatsink support bar (A) onto the
retaining pins (B) of the support's base as shown in
figure 39.
U p g r a d i n g
A
LS700 HANDBOOK
B
4/3