Mitsubishi Electric Apricot LS700 Owner's Handbook Manual page 97

APM features require an APM-capable operating system. If
this option is set to Disabled, only the Auto Start On AC
Loss option will appear. If this option is set to Enabled, all
the following options will appear.
IDE Drive Power Down
Sets any IDE drives to spin down when the computer goes
into power-managed mode. The options are:
♦
Disabled
♦
Enabled (default)
VESA Video Power Down
Sets the command issued to your VESA-compliant graphics
add-in card when the computer enters power-managed
mode. The options are:
♦
Disabled (the
management)
♦
Standby (minimal power reduction)
♦
Suspend (significant power reduction)
♦
Sleep (default) (maximum power reduction)
Inactivity Timer
Sets how long (in minutes) the computer must be inactive
before it enters power-managed mode. The range is 0-255
minutes. The default is 10 minutes.
Hot Key
Sets the hot key for power-managed mode. Press the hot
key while holding down the <Ctrl> and <Alt> keys to enter
power-managed mode. All alphabetic keys are valid entries
for this field.
B I O S a n d s e t u p
monitor is not
LS700 HANDBOOK
under power
5/21