Mitsubishi Electric Apricot LS700 Owner's Handbook Manual page 93

Parallel Port Interface
Selects the printer port, I/O address, and IRQ of the parallel
port. The DMA assignment for the port will be displayed if
the Parallel Port Type is set to ECP. The options are:
♦
Disabled
♦
LPT3
♦
LPT1
♦
LPT2
♦
LPT3
♦
LPT1
♦
LPT2
♦
Auto Configured (default)
When Auto Configured is selected, the Setup program assigns
LPT1, 378, IRQ7 as the parallel port address and IRQ.
Parallel Port Type
Selects the mode for the parallel port. The options are:
♦
Compatible (default)
♦
Bi-directional
♦
ECP
♦
EPP
Compatible means the parallel port operates in AT-
compatible mode. Bi-directional means the parallel port
operates in bidirectional PS/2-compatible mode. EPP and
ECP mean the
bidirectionally.
USB Interface
Enables or disables the USB interface. The options are:
♦
Disabled
♦
Enabled (default)
B I O S a n d s e t u p
3BC IRQ7
378 IRQ7
278 IRQ7
3BC IRQ5
378 IRQ5
278 IRQ5
parallel port
LS700 HANDBOOK
operates high-speed,
5/17