Mitsubishi Electric Apricot LS700 Owner's Handbook Manual page 98

B I O S a n d s e t u p
Plug and Play Configuration Subscreen
5/22 LS700 HANDBOOK
Auto Start On AC Loss
Specifies whether the power supply should resume after AC
power interruption. The options are:
♦
Disabled
♦
Enabled (default)
This section describes the options in the Plug and Play
Configuration subscreen.
Configuration Mode
Sets how the BIOS gets information about non-Plug and
Play ISA add-in cards. The options are:
♦
Use PnP OS (default)
♦
Use BIOS Setup
If Use BIOS Setup is selected, specify the IRQ for each non-
Plug and Play ISA add-in card you install on the
motherboard If Use PnP OS is selected, the BIOS uses run-
time software to prevent conflicts between Plug and Play and
non-Plug and Play add-in cards. If Use PnP OS is selected,
PnP OS is the only option visible in the subscreen.
PnP OS
Enables the computer to boot with an operating system
capable of managing Plug and Play add-in cards. The
options are:
♦
Disabled
♦
Other PnP OS
♦
Windows 95 (default)
This field will only be visible if the Configuration Mode
field is set to Use PnP OS.