Mitsubishi Electric Apricot LS700 Owner's Handbook Manual page 87

♦
6 Seconds
♦
9 Seconds
♦
12 Seconds
♦
15 Seconds
♦
21 Seconds
♦
30 Seconds
When this option is enabled, the BIOS waits the specified
time before accessing the first hard drive. If your computer
contains a hard drive, and you don't see the drive type
displayed during boot-up, the hard drive might need more
time before it can communicate with the controller. Setting
a pre-delay provides the additional time for the hard drive to
initialize.
Typematic Rate Programming
Sets the typematic rates. The options are:
♦
Default (default)
♦
Override
Selecting Override enables the Typematic Rate Delay and
Typematic Rate fields. If set to default, neither of the two
following fields will appear.
Typematic Rate Delay
Sets the delay time (in milliseconds) for the key-repeat
function to start when you hold down a key on the
keyboard. The options are:
♦
250 msec (default)
♦
500 msec
♦
750 msec
♦
1000 msec
B I O S a n d s e t u p
LS700 HANDBOOK 5/11