Mitsubishi Electric Apricot LS700 Owner's Handbook Manual page 22

C h a s s i s a n d c o m p o n e n t s
Installing the Access Side Cover
2/4 LS700 HANDBOOK
Figure 5. Removing the Access Side Cover
1. Observe the precautions in 'Before You Begin'.
2. Check that you have not left any tools or loose parts
inside the chassis. Check that everything is properly
installed and tightened.
3. Holding the side cover at a slight angle, insert the tabs
at the front of the cover into their slots. Swing the
cover snugly against the chassis.
4. Slide the tabs at the rear of the cover down as far as
they will go. It may be necessary to apply pressure
against the side cover in order to properly seat the tabs.