Table of Contents
Advertisement
M o t h e r b o a r d : f e a t u r e s & u p g r a d e s
Processor Upgrades
5/6
FT1200 HANDBOOK
If your motherboard has one processor, you can upgrade the
computer by replacing this processor with a faster one, or by
installing an application processor.
If your motherboard has two processors, you can upgrade by
replacing these processors with two faster processors.
If you install two processors, make sure they have:
♦
Identical speeds and voltages.
♦
The same stepping or a difference of no more than one
stepping. Processor stepping is designated by a five-
letter code, for example, SL28R, printed on the top
edge of the S.E.C. cartridge.
NOTE
If there is only one processor on a motherboard, it must be fitted
in the boot processor Slot 1 connector. In a single-processor
configuration, you must install a termination card in the empty
application processor Slot 1 connector to ensure proper operation
of the computer.
WARNING
In all instances you must remove the rear drive carrier and the
main cross strut of the chassis to safely access the system
processors.
The rear drive carrier assembly has a large cooling fan fitted to
the rear. It is essential that care is taken with this. It must be
correctly refitted and reconnected after you have finished your
work.
Advertisement
Table of Contents
