Mitsubishi Electric Apricot LS700 Owner's Handbook Manual page 102

B I O S a n d s e t u p
5/26 LS700 HANDBOOK
N N O O T T E E
If set to On Next Boot, this option reverts to the default on the
next pass through POST.
Mark Existing Events as Read
Marks all events already in the log as having been not read
(Do Not Mark) or read (Mark). The options are:
♦
Do Not Mark (default)
♦
Mark
Single Bit ECC Events
When selected, this displays the Single Bit ECC Events
subscreen.
Multiple Bit ECC Events
When selected, this displays the Multiple Bit ECC Events
subscreen.
Parity Error Events
When selected, this displays the Parity Error Events
subscreen.
Pre-Boot Events
When selected, this displays the Pre-Boot Events subscreen.
Single Bit ECC Events Subscreen
If Clear Event Log is set to On Next Boot (see page 5/25),
the following fields report information for the last single-bit
ECC error to occur since the last pass through POST.
Date of Last Occurrence
Reports the date when the last single-bit ECC error
occurred.