Installing A Hard Drive In The Main Peripheral Carrier - Mitsubishi Electric Apricot LS700 Owner's Handbook Manual

Removing a narrow Device from the main Peripheral
Carrier
8. Connect power and data cables to the device.
Figure 16. Installing a Hard Drive in the main
Peripheral Carrier
1. Observe the precautions in 'Before You Begin'.
2. Remove the top cover.
3. Remove the access side cover.
4. Remove the bezel.
5. Remove the main peripheral carrier.
6. Remove the four screws that secure the device to the
carrier.
7. Replace the main peripheral carrier back into the
chassis.
C h a s s i s a n d c o m p o n e n t s
LS700 HANDBOOK 2/19