Installing the Bezel
Add-in Cards
Removing an Expansion Slot Cover
Figure 7. Removing the Bezel
1.
Observe the precautions in 'Before You Begin'.
2.
Lift the front of the chassis slightly and align the bezel
with the chassis. You may find it easier to place the
chassis on its back when aligning the bezel.
3.
Press the top of the bezel against the chassis until the
tabs click into place.
The following procedures tell how to remove and install slot
covers and add-in cards.
1.
Observe the precautions in 'Before You Begin'.
2.
Remove the top cover.
3.
Remove the access side cover.
C h a s s i s a n d c o m p o n e n t s
LS700 HANDBOOK
2/7