Table of Contents
Advertisement
Installing the main Peripheral Carrier
Figure 12. Removing the main Peripheral
Carrier
1.
Observe the precautions in 'Before You Begin'.
2.
Place the chassis on its back.
3.
Slide the peripheral carrier into the chassis.
4.
Insert and tighten the two screws that secure the carrier
to the bottom of the chassis.
5.
Place the chassis on its feet.
6.
Insert and tighten the two screws that secure the carrier
to the front of the chassis.
7.
If needed, install an EMI shield in the bottom carrier.
C h a s s i s a n d c o m p o n e n t s
A
LS700 HANDBOOK
2/13
Advertisement
Table of Contents
Troubleshooting
