Mitsubishi Electric Apricot LS700 Owner's Handbook Manual page 84

B I O S a n d s e t u p
Boot Options Subscreen
5/8 LS700 HANDBOOK
Multiple Sector Setting
Sets the number of sectors transferred by an IDE drive per
interrupt generated. The options are:
♦
Disabled
♦
4 Sectors/Block
♦
8 Sectors/Block
♦
Auto Detected (default)
Check the specifications for the hard disk to determine
which setting provides optimum performance.
Fast Programmed I/O Modes
Sets how fast transfers on the IDE interface occur. The
options are:
♦
Disabled
♦
Auto Detected (default)
If this option is set to Disabled, transfers occur at a less than
optimized speed. If it is set to Auto Detected, transfers occur
at maximum speed.
This section describes the options in the Boot Options
subscreen.
First Boot Device
Sets which drive the computer checks first to find an
operating system to boot from. The options are:
♦
Disabled
♦
Floppy (default)
♦
Hard Disk
♦
CD-ROM
♦
Network