Exit Screen - Mitsubishi Electric Apricot LS700 Owner's Handbook Manual

B I O S a n d s e t u p
Security Hot Key (CTRL-ALT-)
Sets a hot key that, when pressed, locks the keyboard until
the user password is entered. The keyboard LEDs flash to
indicate that the keyboard is locked. When you enter the
user password, you do not have to press the <Enter> key.

Exit Screen

This section describes how to exit and save (or discard)
changes to the Setup program.
Exit Saving Changes
Exits and saves changes made to the Setup program. You can
also press the <F10> key anywhere in the Setup program to
exit and save changes.
Exit Discarding Changes
Exits without saving changes made to the Setup program.
This means that any changes you made to the Setup
program are discarded and not saved. You can also press the
<Esc> key in the four main screens to exit the Setup program
without saving changes.
Load Setup Defaults
C C A A U U T T I I O O N N
The default settings may not be the same as the settings entered
during test and system build at the factory.
Returns all Setup program options to their defaults. You can
also press the <F5> key anywhere in the Setup program to
load the Setup defaults.
Discard Changes
Discards any changes you made during the current Setup
session without exiting the program. You can also press the
LS700 HANDBOOK 5/31