Cal Flame 2005 Spa Owner's Manual page 16

Assembly and Installation
4. Insert the bolts through the pre-drilled holes from the inside of the barbecue island (total of four bolts on
each side) (Figure 12).
5. Insert the upper bolts as shown (Figure 13). Tighten the bolts all the way using a 9/16" wrench.
6. Prepare and fill the gap or seam line with speed set (Figure 14).
7. Using your fingertips, push and flatten out the speed set into the seam line (Figure 15).
Page 12
Figure 10
Figure 12
Figure 14
Figure 11
Figure 13
Figure 15
2005 Spa Owner's Manual
7/21/2005