Cal Flame 2005 Spa Owner's Manual page 46

Operating the Cal Flame Entertainment Center
AUTO PROGRAM Button
Select the regular channel broadcast TV or CABLE TV for AUTO PROGRAM. All the channel numbers
for TV or CABLE TV will be scanned. The broadcasting signals will be detected and automatically stored.
ENTER Button
Use this button to end the choice on the menu.
PICTURE SELECT Button
Each time this button is pressed the on-screen picture adjustment display cycles through "adjustment
screens" as follows:
BRIGHTNESS
Operation
1. Point the remote control directly at the TV Monitor.
2. Press the red power button located at the top left side of the remote control.
3. Allow a few seconds for the TV monitor to warm up before pressing any other buttons.
4. Once on, the TV monitor will display a small icon at the lower left side signifying which mode the TV is
currently in.
5. Press the "SELECT" button located at the top right side of the TV remote control until the icon
"COMPOSITE VIDEO" is displayed on the screen of the TV monitor. This will allow the TV Monitor to
accept the signal from the DVD player.
6. When an antenna, cable or satellite system is connected to the coaxial cable on the right front side of the
spa, you will be able to receive live TV signals by pressing the "SELECT" button until the "COMPOSITE
TV" icon appears on the TV monitor. Allow a few second for the TV tuner to acquire the new signal prior
to switching channels.
7. Press the right "VOL" button to adjust the volume up to "80" as displayed on the screen. This will allow the
Stereo system to receive enough volume to reproduce the audio signal without distortion.
NOTE: You will not be able to hear audio form the TV Monitor itself. All audio signals for the TV or DVD are
only acquired through the stereo when programmed to 88.7FM.
Adjusting the Picture
When watching the TV programs, the quality of the picture can be adjusted to suit your taste.
1. Press MENU. The main menu appears.
2. Press SELECT VIDEO. The video source appears. Press this button to access the AUDIO/VIDEO input
jacks.
3. Select CLOSED CAPTION and then press ENTER. Closed captioning lets you display the audio portion of
a program as text on the TV screen. This is useful to the hearing impaired or anyone who wants to watch a
program without a sound. There are two types of closed captioning available: C1 (Caption 1)and C2
(Caption 2). C1 displays the full translation of the primary language in your area. C2 may be used as a
source for secondary languages, simplified English, or other translations transmitted in your area. Closed
captioning is not available on all channels or at all times. Only specific programs are encoded with closed
captioning information.
Page 42
CONTRAST COLOR TINT
SHARPNESS
2005 Spa Owner's Manual
7/21/2005