2 ] Aborting Data Transmission - Denso BHT-8000 User Manual

Appendices
! Phase 3 with timeout at the receiving station
If the receiving station receives no subsequent text or normal sequence of DLE EOT and IDs within 30
seconds after sending a sequence of DLE ACK and IDs, then it sends a sequence of DLE EOT and IDs
and aborts the transmission abnormally.

[ 2 ] Aborting Data Transmission

Pressing the C key aborts data transmission.
If the C key is pressed during downloading, the BHT transmits a sequence of DLE EOT and IDs and
aborts the file transmission.
If it is pressed during uploading, the BHT transmits the current transmission block followed by a
sequence of DLE EOT and IDs and then aborts the file transmission.
203