Denso BHT-8000 User Manual page 61

Data that can be copied from one BHT to another BHT
The copying function between BHTs copies the following set data:
LCD contrast level
Beeper volume
Switching between beeper and vibrator
Execution program to be run automatically when the BHT is turned on
Message version (English or Japanese)
Display font size
System status display
Date
Time
Setting of black-and-white inverted label reading function
Decode level
Minimum number of digits to be read for ITF
Minimum number of digits to be read for STF
Minimum number of digits to be read for Codabar (NW-7)
Illumination LED ON/OFF mode
Interface port to be used in user programs
Interface port to be used in System Mode
Communications parameters for the IrDA interface
Communications parameters for the direct-connect interface
Communications protocol options for the IrDA interface
Communications protocol options for the direct-connect interface
Communications protocol type
Shift key function defined
M1 key function defined
M2 key function defined
M3 key function defined
M4 key function defined
Resume function
Setting of remote wakeup
Transmission speed for remote wakeup
48