Bht Turning-Off Notes; 1 ] "Shutdown In Progress" Message; 2 ] If The Bht Is Shut Down Abnormally - Denso BHT-8000 User Manual

Chapter 2 Getting Started the BHT and System Mode

2.3.6 BHT Turning-off Notes

[ 1 ] "Shutdown in progress" message

When the BHT is turned off by pressing the PW key or by the auto power-off feature, it displays the
following message and starts preparation for shutdown.
When the above message is displayed, do not remove the dry cells or battery cartridge.
If you do so and leave the BHT without dry cells or battery cartridge loaded for one hour or more, then
the error message "Contact your administrator. Note the error number. (20XX)" may appear when
turning the BHT on at the next time.

[ 2 ] If the BHT is shut down abnormally

If the BHT is shut down abnormally* and is left without dry cells or battery cartridge loaded or with dead
dry cells or discharged battery cartridge loaded, then unsaved data may be lost.
(*"Normally shut down" refers to "turned off with the PW key or by the auto power-off feature.")
If the above problem has arisen, the following message will appear when you load new dry cells or fully
charged battery and turn the BHT on.
(1) Press the 2 key while holding down the SF key. The screen will switch to the following:
31