Denso BHT-8000 User Manual page 161

! Problem
Downloading has failed.
! Solution
To retry downloading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key. Check the interface
port, communications parameters, and communications protocol in
the SET SYSTEM menu or perform the communications test in the
TEST menu. (Refer to Chapter 2, Subsection 2.5.3, [4.5] and [5.7].)
It is also necessary to check the communications parameters setup of
the host PC.
During uploading of a program file, data file, BHT
system parameter file, or system message file
! Problem
The file you attempted to upload is damaged.
! Solution
To upload the damaged file as is, press the 1 key.
! Problem
The memory is insufficient for setting up the BHT system parameter
file or system message file to be uploaded.
! Solution
Press the C key to return to the SYSTEM MENU and delete
unnecessary files. (Refer to Chapter 2, Section 2.5.3, [ 8 ].)
! Problem
The memory has already contained 80 files, so the BHT system
parameter file or system message file cannot be set up.
! Solution
Press the C key to return to the SYSTEM MENU and delete
unnecessary files. (Refer to Chapter 2, Section 2.5.3, [ 8 ].)
148