4 ] System Environment Setting - Denso BHT-8000 User Manual

[ 4 ] System Environment Setting

("9:TCP/IP" available in LAN-support
BHT system only)
Selecting "4: SET SYSTEM" on the SYSTEM MENU calls up the
screen shown at left.
[1] EXECUTE PROGRAM: Sets an auto-start execution program to
[2] DISPLAY:
[3] DATE/TIME:
[4] BARCODE:
[5] COMMUNICATION:
[6] KEY:
[7] RESUME:
[8] DEFRAG:
[9] TCP/IP:
(Available in LAN-support
BHT system only)
Select a desired item by using the numerical keys or F5 and F6 keys,
and the selected item becomes highlighted. Then press the ENT key.
Press the C key to return to the SYSTEM MENU.
56
be run when the power is turned on.
Sets the message version (English or
Japanese).
Sets the calendar clock (date and time).
Sets the special barcode scanning
parameters (the
inverted label reading and the decoding
level) and the minimum number of digits
to be read for bar codes (ITF, STF and
Codabar).
Sets the communications environments
(interface port and communications
parameters).
Defines the functions of the shift key
and magic keys.
Sets the resume function.
Defragments the drive.
Sets the TCP/IP and FTP.
black-and-white