Applying Power To The Cu-8000 - Denso BHT-8000 User Manual

5.3 Applying Power to the CU-8000

CU-8001: The CU-8001 should be supplied with power from a wall socket via the dedicated AC adapter.
Connect the outlet plug of the AC adapter to the power inlet connector of the CU-8001, then plug the
other end into a wall socket. Pressing the | side of the power switch turns the CU-8001 on; pressing the
! side turns it off.
CU-8002: The CU-8002 requires no AC adapter. Turning on the connected host will supply power to the
CU-8002.
CU-8021: The CU-8021 should be supplied with power from a wall socket via the dedicated AC adapter
or from the USB host (PC) or USB hub via the USB interface.
Connecting the AC adapter will supply power to the CU-8021. If no AC adapter is connected, turning on
the USB host (PC) and USB hub will supply power to the CU-8021.
NOTE: To charge the battery cartridge, use the AC adapter except when the CU-8021 is connected to a
self-powered hub capable of supplying power (5V 500 mA) via the USB line.
NOTE: To charge the battery cartridge even when the USB host (PC) is in the suspended mode, use the
AC adapter.
CU-8011: The CU-8011 should be supplied with power from a wall socket via the dedicated AC adapter.
Connect the outlet plug of the AC adapter to the power inlet connector of the CU-8011, then plug the
other end into a wall socket.
AC adapter
The shape of the AC adapter
designed for the CU-8011 is
different from this.
• If smoke, abnormal odors or noises come from the CU, immediately
unplug the AC adapter from the wall socket, disconnect the interface
cable from the CU, and contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
• If foreign material or water gets into the CU, immediately unplug the
AC adapter from the wall socket, disconnect the interface cable from
the CU, and contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
• If you drop the CU so as to damage its housing, immediately unplug
the AC adapter from the wall socket, disconnect the interface cable
from the CU, and contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
• Use the dedicated AC adapter only. Failure to do so could result in a
fire.
Power switch
(Provided on the CU-8001)
Power inlet connector
154