Denso BHT-8000 User Manual page 9

• If you drop the BHT so as to damage its housing, immediately turn off the power, pull out the
battery cartridge, and contact your nearest dealer.
Failure to do so could cause smoke or fire.
• For those machines using dry cells, do not mistake the plus and minus marks when loading
them into the cartridge.
Failure to do so could cause battery-rupture or leakage of battery fluid, resulting in bodily
injury, fire, or property damage.
• For those machines using dry cells, do not use anything other than the specified type of dry
cells, nor use new and old ones together.
Doing so could cause battery-rupture or leakage of battery fluid, resulting in bodily injury, fire,
or property damage.
• Do not use batteries or power sources other than the specified ones; doing so could
generate heat or cause malfunction.
• In environments where static electricity can build into significant charges (e.g., if you wipe off
the plastic plate with a dry cloth), do not operate the BHT. Doing so will result in malfunction
or machine failure.
• When connecting or disconnecting the direct-connect interface cable to/from the BHT, do no
plug or unplug at an angle and do not pull the cable strongly. Doing so will result in a machine
failure.
• If the BHT has been stored in a hot (50°C to 60°C, 122°F to 140°F) and humid place, allow it
to sit at room temperature and humidity for at least one day before use. Using the BHT with
its inside being hot will fail to scan or result in a machine failure.
Handling the CU-8000
• Never put the CU in places where there are excessively high temperatures, such as inside
closed-up automobiles, or in places exposed to direct sunlight.
Doing so could affect the housing or parts, resulting in a fire.
• Avoid using the CU in extremely humid or dusty areas, or where there are drastic
temperature changes.
Moisture or dust will get into the CU, resulting in malfunction, fire or electrical shock.
• Never disassemble or modify the CU; doing so could result in an accident such as fire or
malfunction.
• If you are not using the CU for a long time, be sure to unplug the AC adapter* from the wall
socket and disconnect the interface cable for safety.
Failure to do so could result in a fire.
• When caring for the CU, unplug the AC adapter* from the wall socket and disconnect the
interface cable for safety.
Failure to do so could result in an electrical shock.
vii
*Not available to the CU-8002.