Denso BHT-8000 User Manual page 109

Run-time messages in downloading/uploading by FTP
When the BHT is uploading or downloading files by FTP, the following messages will appear in the
bottom of the LCD:
Message
Aborted.
Connection error
Device error
Downloading
Download failed
Download finished
File broken!
File not found!
File not selected
File type mismatch!
FTP error
FTP opened
Illegal text format!
Opening device
Out of memory!
Out of range!
Parameter error!
Program file error!
Routing TCP/IP
Syntax error!
TCP/IP error
TCP socket error
Too many files!
Uploading
Upload failed
Upload finished
Displays when:
Uploading or downloading is interrupted.
The communications pathway is disconnected.
Failed to open a device.
Downloading starts.
Downloading has abnormally ended.
Downloading has normally ended.
In uploading, the specified file is broken.
In downloading, no file is found.
No file is selected.
In uploading, the attributes of the file selected in the SELECT FILE entry
box are different from those in the DIR/FILE entry box.
During execution of an FTP command, an error has occurred.
Connection is established by FTP.
The format of a received text is illegal.
Opening a device.
The memory is insufficient for storing files to be downloaded.
The specified parameter(s) is out of the allowable range.
In downloading, the record length and/or field length specified in the
FIELDS entry box exceed 255.
The received program file is illegal.
Connecting to the TCP/IP communications pathway.
A syntax error has occurred.
Failed to connect to the TCP/IP communications pathway.
During execution of an FTP command, an error has occurred in the TCP
layer.
The current download will exceed the allowable number of files in the
memory.
Uploading starts.
Uploading has abnormally ended.
Uploading has normally ended.
96