Denso BHT-8000 User Manual page 4

How this book is organized
This manual is made up of five chapters and appendices.
Chapter 1 Quick Guide
Describes the basic operating method of the BHT and the related notes.
Chapter 2 Getting Started the BHT and System Mode
Summarizes the BHT system configuration and describes the operation including preparation and
System Mode (which is required for the efficient use of application programs).
Chapter 3 Communications Operations of BHT
Describes the communications operations of the BHT—the IR communication, RS-232C interface
specifications, basic communications specifications, and the communications protocols—for data
transfer with the host PC or other devices.
Chapter 4 Error Messages
Lists the error messages which will appear on the LCD if some error occurs in the BHT.
Chapter 5 Handling the CU-8000 (Option)
Describes the handling procedure of the CU-8000, the interfacing with the host PC, and the charging of
the battery cartridge. This chapter also describes the LAN-support communications unit CU-8011.
Appendix A: Specifications
Appendix B: Communications Protocol Details
Appendix C: A Typical Basic Operation
ii