Communication Format; Data Transmission Format - Denso GT10B-SB User Manual

10.2 Communication Format

10.2.1 Data transmission format

Select one of the following two data transmission formats.
Code ID
Header
mark
Header Prefix
(1) Header/Terminator
The following choices are available.
Header: None (default) or STX
Terminator: CR (default), LF, CR LF, ETX, or none
Note: Selecting none for a terminator automatically uses a CR terminator in the control command transmission format.
(2) Prefix/Suffix
Each of a prefix and suffix should be a maximum of eight bytes long and consist of ASCII characters (00h to FEh).
The default is no prefix/suffix. You can specify a prefix or suffix with the configuration software (ScannerSetting).
No. of digits
Prefix
n1 n2
No. of digits
Code ID
mark
n1 n2
Bar code data
n3 n4
Bar code data
n3 n4
40
Suffix Terminator
Suffix Terminator