(3) Confirming the memory area selected for initialization
(4) During initialization
Selecting the "USER AREA EXCEPT FONTS" in step (1) above will
call up the confirmation screen shown at left.
[1] Yes:
Starts initialization.
[2] No:
Cancels initialization and turns the power off.
Select a desired item by using the numerical keys, then press the
ENT key.
Pressing the C key will switch the screen back to the area selection
screen.
Selecting the "WHOLE USER AREA" in step (1) above will call up the
screen shown at left.
[1] Yes : Starts initialization.
[2] No :
Cancels initialization and turns the power off.
Select a desired item by using the numerical keys, then press the
ENT key.
Pressing the C key will switch the screen back to the area selection
screen.
During initialization, the screen shown at left is displayed.
37
Chapter 2 Getting Started the BHT and System Mode