cHapteR 7: paRt ReplaceMent GuiDe
7.1 fRont SHRouD ReplaceMent - continueD
4) remove the 9 screws holding the right shroud (Figure E) and 7 screws holding the left shroud (Figure F).
fiGuRe e
fiGuRe f
5) Figure G shows the elliptical with both front shrouds removed.
fiGuRe G
6) reverse steps 1-5 to install a new front shroud. NOTE: when re-installing the 14mm nut removed in step 2, be sure to tighten the nut to
70 n-m of torque.
23