Assembly Instructions - Vision Fitness S7100 Suspension elliptical Service Manual

cHapteR 8: SuSpenSion elliptical aSSeMbly GuiDe

8.3 aSSeMbly inStRuctionS

notE: a second person will be helpful to complete
this step.
* slide the console mast boot onto the console mast.
* Using the 2 bolts inserted into the console mast
as guides, set the console mast into the console
mast frame bracket ensuring cables are not pinched.
secure the front of the mast to the console mast
bracket with the other 2 socket head bolts. secure
each side of the console mast to the console mast
bracket with 1 socket head bolt. Do not tighten
the bolts yet.
* release the console mast elevation bracket and
slide it down the console mast to its lowest position.
slide the console mast elevation bracket over the
elevation motor tube so that the holes in the console
mast elevation bracket line up with the top holes in
the elevation motor tube. Insert the bolt and washer
and tighten just to snug. Do not allow the bolt to
draw tight and deform the tube.
* tighten the 6 bolts on the mast completely.
* Connect the data cables coming from the bottom
of the console mast to the data cables coming up
from the frame.
* slide the console mast boot down over the frame.
54