6.5 tRoubleSHootinG - noiSe iSSueS
NOISE IN ONE PARTICULAR SPOT DURING THE ROTATION OF THE CRANK
1) Check the tightness of all external linkages.
a. If you find a loose or sloppy joint, tighten the hardware at this joint.
2) If all external linkages are tight, it is likely that the crank bearings are bad.
a. replace the crank assemblies (the bearings are not replaceable as a separate part).
NOISE WITH NO SPECIFIC POSITION DURING THE ROTATION OF THE CRANK
1) remove the side covers and check the flywheel operation. Change the fly wheel bearings as needed.
20
cHapteR 6: tRoubleSHootinG