Speed Sensor Replacement - Vision Fitness S7100 Suspension elliptical Service Manual

7.20 SpeeD SenSoR ReplaceMent

1) remove the front shrouds as outlined in section 7.1.
2) remove the speed sensor wire from the ECB wire harness and disconnect it (Figure a).
3) remove the 2 screws holding the speed sensor to the frame (Figure B).
4) reverse steps 1-3 to install a new speed sensor.
5) test the suspension elliptical for function as outlined in section 7.21.
cHapteR 7: paRt ReplaceMent GuiDe
fiGuRe a
fiGuRe b
49