7.7 HR GRipS ReplaceMent
1) Use a flat screwdriver to pry the lower metal hr sensor from the hr grip and unplug the wire (Figures a & B).
fiGuRe a
2) remove the 2 screws holding the 2 halves of the hr grip together (Figure C).
3) remove the hr end cap and the 2 halves of the hr grip (Figure D).
fiGuRe c
4) reverse steps 1-3 to install new hr grips.
5) test the suspension elliptical for function as outlined in section 7.21.
30
cHapteR 7: paRt ReplaceMent GuiDe
fiGuRe b
fiGuRe D